:	Dec 2, 2004

.

Fold down the rear seat backrest.

.

Release the door aperture weatherstrip.

.

Release the safety belt anchor.   Remove and discard the bolt.

.

Release the tailgate aperture seal.

.

Remove the support spigot from the tailgate.   Release the clip.

.

Remove the rear quarter trim panel.   Remove the Torx screw.   Release the 8 clips.   Disconnect the 2 electrical connectors.

.

:   Do not disassemble further if the component is removed for access only. Remove the stowage tray.   Release the cover.

.

Remove the audio control switch.   Release the 2 clips.

.

Remove the accessory socket.

.

Install the accessory socket.

.

Install the audio control switch.   Secure the clips.

.

Install the stowage tray.   Install the cover.

.

Install the rear quarter trim panel.   Install the clips.   Tighten the Torx screw to 8 Nm (6 lb.ft).   Connect the electrical connector.

.

Install the support spigot to the tailgate.   Install the clip.

.

Install the tailgate aperture seal.

.

Install the safety belt anchor.   Tighten the Torx bolt to 40 Nm (30 lb.ft).

.

Install the door aperture weatherstrip.

.

Return the seat backrest to the upright position.